01/07/11

Business Name

Seat

I went through three attempts at the seat bracket.  The first was the “fold down from the top idea”.  Too flimsy.  Second was going to be just a straight forward bar across the center of the hull.  Worked ok but too cumbersome to fold out of the way.  This is the third idea which is a 60x60mm box section bracket welded to the port side.  Still a spring and lock assembly to add but more or less complete.  I made it very tight so there is no play or “wiggle” on the seat.  Its quite stiff to push folded but I don't mind that.

Submersible Build Log