13/02/13

Business Name

Lights

I greased the O ring on the Blue Globe gland with silicone grease (the O ring, not the blue seal) and fitted it into the M16x1.5 threaded hole.† Then I assembled the torch and rigged it up temporarily to the voltage converter, switched it on and stuck it in the sink.† The voltage converter is sitting on the granite worktop which is a really good conductor of heat so Iím not 100% sure on how hot it gets.

I left the torch in the sink on full beam at 7.5V for an hour.†

No leaks and it was all ok afterwards.

Submersible Build Log