29/07/12 |
Business Name |
Dropweights |
I started fitting a cable for the drop weight release mechanism. I used straight forward bicycle cable parts. I did make the part where the cable sleeve meets the stopper. Bottom of picture. This was a normal M8 bolt that I managed to drill all the way through. I didn’t think I would be able to drill it without breaking the drill bit and just thought I would “have a go and see”. But with care I managed to get it. The cable sleeve is not fitted in the picture and I am not sure what I will do at the other end as it requires about a 150mm pull which is quite a lot, so I need to get some sort of handle that is suitable. |
Submersible Build Log |